Maytag MDB3100 Dishwasher "drain stub connecting" Questions

...drain hose stub connection at the disposal for plugging. Lots of material flying around in there which could block the stub pipe. You might consider inserting a short section of drain pipe that has a ...

...drain stub under the sink. Remove the hose from under the sink and place it into a bucket. Close the dishwasher door and cancel the cycle to put the dishwasher in a drain cycle. Listen for the drain ...

...the machine out. Try pulling the hose connection at the sink drain stub and using a wet/dry vacuum, **** the end of the hose and the drain stub. With luck, the clog will be pulled out. Good

...stub out on the drain pipe for the sink, like this. Here is a pic of a drain line installed on a Garbage Disposal. You will need to get a 3/8 braided steel dishwasher supply line. Thic will hook up ...

drain. Do I need to replace the pump? If the dishwasher is connected to a disposal, there is a knock-out on the disposal inside the stub on, a screwdriver will remove it. Catch it so it will not go in

...stub on the sink drain plumbing to clear any possible clogs. There may be a blocked check valve near the pump that might have to be cleaned or replaced. Check the hose itself for any kinks or ...

...drain port and tap on it with hammer until it breaks off. Then remove that stub from the sink side. The plumber did not make an air gap in the dishwasher drain hose when he reattached it to the new ...

...stub for the DW drain hose and replaced it with a straight pipe, which will let me use a plunger effectively. So, I would assume that I need to run the DW drain hose upward towards the bottom of the ...