...INSIDE. HOW DO I FIX IT? HELP THANK YOU IN ADVANCE! BERNADETTE When you dropped it one of the circuit boards inside may have cracked, or one of the connections may have severed. This could be ...
my camera imeging butn is not pressing Hi, Circuit board problem with your camera and suggested to fix it at dealer. Regards, Jay
...circuit board) are damaged or don't make a proper electric contact. Any digital camera uses about 8-9 voltage values to power on different components. A flash will require about 300Volts in order to ...
...suggestion below, if it does not work, your Circuit board is damaged. Put the camera in a sealed container filled with 2 cups of rice for about 48 hours. Hope this can be of help. Kind regards ...
circuit board and the LCD are damaged and I need a replacement. Thanks i suppose parts that you're looking for is not available in the market, try to send that camera back to samsung and their service
Question about Samsung DigiMax Cameras
...the battery removed, that will help dry it out. It would be best to disassemble it and clean the circuit boards with denatured
be a protection fuse on the circuit board inside but locating and fixing this would require an experienced electronics technician. i wouldn't hold out too much hope of getting this camera repaired
...circuit board (to the lens-unit) out of there connectors. After I put them back in again, the camera worked. I geuss it was a bad electric connection of the lens-unit. Maybe this will solve your ...
circuit, and replace the board, bulb, and cap as a unit, but that's not an easy job. Other alternative is to get a new camera, since if you elect to have it serviced, it will justify buying a new one,
...circuit board ] . For that you need to take your CAM to a repair shop . good luck . please don't forget to rate ! I had this same problem when I bought my camera. In fact I took it back because I ...
480 questions posted
Usually answered in minutes!
436 Questions
362 Questions
283 Questions
151 Questions
142 Questions
