Question about D-Link Computers & Internet
change settings and the like. give a solution of this problem immidiatly Check first the cables and connections, and the broadband filter. You need to connect through cable to configure the router. To
change the 3rd octet of the ip address, ex-192.168.1.1 to 192.168.2.1 then your connecttion should be , the cable form the adsl model goes to the port 4 of the router and the router should be set on a
...change the default SSID and turn off SSID broadcast. 6. Setup encryption key the strongest is WAP2 7. For further secutity measures - turn on MAC address filtering and enter the MAC address of the ...
Question about Trendware Computers & Internet
...IP or something similar That is the number you should change. I usually change the third block e.g. 192.168.2.1 as opposed to 192.168.1.1 You should also have some DNS numbers from the checks further ...
...IP address than your original modem. Make sure router is set to enable DHCP which gives out an automatic ip address and check your wireless card and network cards are set to obtain ip address ...
...ip address. hi..i have a smartAX MT882 bsnl modem. My rt-n56u will have to be connected in pppoe mode, therefore i have bridged my modem which was earlier always on. I entered the id pass, even ran ...
IP address. For more information, please see Answer ID 534 for instructions. If using a 10/100-network adapter, change its speed to 10Mb, half duplex. For instructions on doing so: Windows 95/98/ME 1.
Question about Linksys Computers & Internet
IP address. For more information, please see Answer ID 534 for instructions. If using a 10/100-network adapter, change its speed to 10Mb, half duplex. For instructions on doing so: Windows 95/98/ME 1.
61 questions posted
Usually answered in minutes!
363 Questions
102 Questions
73 Questions
49 Questions
45 Questions