...Bobbin to wind properly I have a Kenmore model 385 1278191. sewing machine. When I wind my bobbin it just tangles. Doesn't wind evenly. Then when i try to sew, it just gets tangled up and breaks my ...
...bobbin tension. I have a different machine (Kenmore 15516) with the same problem, but can't figure how to adjust the bobbin tension. Can you help? There should be a screw on the side of the bobbin ...
Jammed thread. It's happened about five times already, three last night. I have never made anything with the machine (or any) but I know that's not supposed to do that! I've threaded the machine and I
bobbin tangle Hi. Boy, do I need help.. When I run the machine with no fabric (i.e. to get the bobbin thread pulled up after I dropped it in ), it runs fine. When I put fabric in and begin to sew it ...
kenmore 158 12271 I am able to load the bobbin, but when I try to catch the lower thread with the top thread, the top thread loops around the entire lower casing. When I pull the end of the top thread
bobbin thread tangles Loose loops of thread remain in the bobbin area. Stitches do not lock. If you have threaded the machine with the presser foot up, check the bobbin to be sure the thread is ...
Bobbin thread keeps tangleing up. Your not placing the bobbin in the correct way. When you place it in the make sure it' going clock wise
thread gets tangled in the lower bobbin area Make sure you insert the bobbin into the bobbin case correctly. In the bobbin case there's always something that you have to hook around.
Question about Janome Sewing Machines
...kenmore made by Janome model 385.19106900 and just recently started getting a bad tangled mess in bobbin area and thread breaks, I have changed bobbin,needle threaded rethreaded changed tension and ...
the bobbin keeps tangling up under the plate Totally rethead your machine, and use a new needle. Make sure that your bobbin is inserted correctly.
340 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
235 Questions