...eg two layers of cotton. Also the stitches aare tiny and I have tried several solutions BUT not fixing the problem Materiel will not move from starting point. Are the feeddogs raised ? Also
Question about Necchi Sewing Machines
...fix it?? it sounds like the feeddogs are in the down position, look at the area where the needle plate is and see if you can see the feeddogs?you can even run your finger over that area and you ...
...and all of sudden it stopped feeding and just hums. How do I fix it? it's sound like something has happened to the feeddogs and it would be a good idea to have the checked at a sewing machine
Question about Husqvarna Sewing Machines
...Your machine's feeddog drop control may loose or worn. Your authorized Viking repair dealer can fix the problem
feeddogs for normal sewing and darning. Possibly you need to flip that switch lever. If that doesn't solve it then the freearm cover on the bottom needs to be removed and the feeddog mechanism cleaned
have to do? Raise the feed dogs, a manual may be helpful if you don't have one. Fix Machines here is a link to a manual you could purchase. Also, remove needle and clean out the groves of the feeddogs
...the fabric does not advance. I think the feed dogs are too low, but don't know how to fix it try these links for a manual to see if they show were the feeddog lever
...fix? the feeder moves forward and back but does not rise up to move material. here is a link for a free manual see if it has the information in it about the feed dogs, some machine have a lever to ...
Question about Singer Sewing Machines
position. If your machine has this feature just change the button to feeddogs up and this should fix the problem. Good luck! Check the pressure on the foot. It's either to low or to high. I did it to
...for several years, a trip to a service man would do it the world of good, and he would be able to fix your problem
302 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions