Frigidaire ATF6000ES Front Load Washer "hose shopvac" Questions

...shopvac hose under drain clean out and slowly remove cap til water is out . Shopvac will catch water. Also if its not too full u can lean it back at 45 degrees and water will move away from clean ...

...hose and siphon water out with shopvac until all water is drain then remove pump and inspect for debris. most times a coin or small sock or thong will clog it up. PS where some clothes you don't ...

...instruction in detail would be great if the belt is not broken you dont need to change it remove hoses from pump and clean the pump out...shopvac the water out of the machine first so you dont ...

...under the drum assembly. six screws on the back of the unit removes a panel. behind that its easy to see the hose at the bottom of the drum. remove a couple of clamps and shopvac out the ...

...drain hose into a bucket, out a door, etc, or use a shopvac (take clothes out first).  This washer has a broken agitator belt.  If it is new, call a repairman as should be under

...hose connectors on the machine - they may be clogged with lime or sediment. If so, use a wet-or-dry vacuum cleaner (e. g., ShopVac) to clean the strainers, or if they are easily removed, you can ...

...shopvac and vacum the drain hose with the door open till you hear you have all the water out of the washer will make different sound if you dont have shop vac get raditor hose clamp from auto parts ...

...shopvac. the drian hose is not clogged or kinked. could it be the water pump? Hi, Problems with a washing machine not spinning or not draining are often inter related.. If you are having a problem ...

...there may be a crapload of lint in there or a birds nest. Compressed air in the pipe with an agitating device may work or shopvac hose if run is short. Be prepared for a mess on either end. ...