Frigidaire ATF6000ES Front Load Washer "high efficiency washers enough water" Questions

...clothes are only wet. is it supposed to fill with a lot of water or not? thank you for your help If its a High efficiency washer it doesn't use much water. Usually the front load washers are HE ...

...high efficiency' washer, meaning that it is supposed to use a minimum amount of water to clean clothes as opposed to older washers that just filled up the tub to a fixed level. You also need to use ...

high efficiency washer but it seams that there is not enough water. The clothes look wet but that's it. Is this normal? Yes very normal in a front loader for clothes to be dripping wet but you may see

...Water level is not visible at all, there's just enough to get the laundry wet. preasour switch RUN THE MACHINE EMPTY OF ALL CLOTHES. THE WATER LEVEL CAN BE SEEN EVEN THOUGH IT IS LOW. THESE MACHINES ...

...stops filling before the laundry is even all wet! Is there a way to bypass the sensor? If this is a new mfg after 2011 it high efficiency style and does not fill with much water and there is no ...

...washers, it super efficient and uses very little water compared to the older models, even though it does not look like it has enough water in it to fo a load of laundry- it actually does everything ...

high efficiency washer? I have reduced the amount of detergent to very little. Sometimes if the spin is on too high and/or if the wash load is to large can leave streaks in jeans. wash inside out make

...enough hot water in for warm or hot washes. The tech ordered a new suspension for the 1st problem (even though he never heard it). The 2nd prob he said wasn't a prob. That these washers ...

is grit in the water valve holding it open just enough to allow the water to seep by. You should get a filter system for your washer and replace the water valve, Grit is not covered by most warranties