Hoover SteamVac F5914-900 SpinScrub Upright Vacuum "water not dispense" Questions

water to dispense when pressing button. Shampoo will come through and suction working, water not dispensing. Check the release valve on bottom of clean water reservoir unscrew if needed, once again if

...water will dispense i have a proheat that wont dispense water-replaced pump but stiil wont dispense water? Check all your hoses and make sure that they are not blocked and everything can run freely ...

...dispense water water tank (top part, not the dirty water tank) doesn't dispense water at all. it worked fine a few days ago but not it doesn't. what does seem to be the matter and what should I do to ...

Water does not dispense on wash cycle When I pull the trigger on the wash cycle, no water comes out. However, it comes out fine when it is in the rinse position. Somehow, the soap is being dispensed -

...dispense water. Unplugged and plugged back in, press x valve, etc etc model 20391 Here are some troubleshooting steps you can try: Check the clean water tank: Ensure that the clean water tank is not ...

Cleaner will not dispense the water from the tank. It solution is dispensed but not the water from the blatter. It also picks up water from the carpet. check hose for a clog

bissel carpet shampooer is not dispensing water The bissel carpet cleaner is not dispensing water. What do I do? It vacuums fine. put it on the curb probably , the water tank is not firmly pressed ...

...dispense water I have only used this once, with no issues. I tried running it the last two days and no water/soap will dispense on th carpet. Hoover is very unhelpful with helping me. When you attach ...

...a Bissell model 9200 that is not dispensing fluid, wondering which part is the pump that controls water, I see a blue item inside that appears to be connected to the tubes that select water spray. ...

...dispense water and cleaner. According to a factory authorized dealer, the heater is clogged and will need to be replaced for $100. According to similar posts, the issue lies with the pump belt. Your ...