Hoover U5753-900 WindTunnel Bagless Upright Vacuum "vacuum beater bar turning" Questions

Ad

Question about Electrolux Vacuums

1 Answer

...beater bar won't come back on. While vacuuming I took in something that siezed up the beater bar...so I turned it off. After pulling out the stuff I turned it back on only to discover that the beater ...

Ad

Question about Dyson Vacuums

1 Answer

...vacuum beater bar will not turn it is because the belt that turns this beater bar has broken. That said, most of the dyson's require you to buy a beater bar assembly which includes the belt. Any ...

Ad

Question about Dyson Vacuums

1 Answer

...beater bar where the vacuum picks up. That is where vacuums usually stop up. Reassemble the vacuum. If necessary, slip the belt over the motor shaft and then slide the roller undre the belt. Install ...

...vacuum is stuck" This message generally means that the beater/brush bar is not turning. Try rotating the beater/brush bar manually to see if it can turn freely. If not, you will need to remove the ...

...beater bar belt or the motor shaft belt? If so, you need to set the vacuum in a horizontal configuration and turn the vacuum upside down. Next remove the five screws from the base plate and lift the ...

Question about Bissell Vacuums

1 Answer

...vacuum beater bar side up. Locate the catches or screws that hold the plate on that covers the beater bar. Remove the plate. The beater bar sits in sockets where it attaches to the vacuum, so remove ...

Question about Top Vacuums

1 Answer

...beater bar on your Vax Air Reach vacuum cleaner won't spin, despite the fact that the green light is on, there may be a few possible causes: Belt is worn or broken: If the beater bar belt is worn or ...

...vacuum, the beater bar disengages and stops spinning. So I know the beater bar/brush is CAPABLE of spinning, but not when the vacuum is leaning back to be pushed/pulled across my floor. Your belt is ...

Question about Eureka Vacuums

1 Answer

vacuum turns on and suction in hose works, beater bar won't turn If you hear the motor in the head running and the beater bar isn't rotating, you probably need a drive belt. With the power off, make ...

Question about Dyson Vacuums

1 Answer

...for beater bar, but now beater bar motor will not engage/turn on. Check your clutch to make sure it's engaged. There should be a knob on the foot of the vacuum that can be turned to stop the

Not finding what you are looking for?
Hoover U5753-900 WindTunnel Bagless Upright Vacuum Logo

188 questions posted

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...