How do I remove the agitator from an old Hoover 2315L? Agitator itself just slides on splined shaft. At that age it's undoubtedly "growed" on there and isn't going to be easy to pull in all likelihood
...BELT PLEASE SEND ME AN APPROPRIATE FIGURE DIAGRAM. Remove the lower plate Carefully lift up on the agitator assembly until it clears both sides of the nozzle housing. Remove the belt from the motor ...
Agitator Rattling Hello there, The Agitator (Brush bar) in my Dyson rattles like crazy, when i had a closer look, it looked like it was loose and not fitted, as if there was a washer of some sort ...
...bottom side is up. Remove the 4 screws in bottom plate and lift off. Look on the left side of the agitator brush. You should see the belt there. Remove agitator brush roll and used belt. Discard ...
...slot. 3. Lift extension of bottom plate, rotate plate and remove from cleaner body. 4. Remove agitator and broken agitator belt. 5. Slip agitator through new belt. (With lettering toward
How do I replace the belt in my hoover empower There's a plastic cover over the agitator. (the part that should spin, with tough bristles) Unscrew it. Pull out the agitator. Put the new belt over the
...slot. 3. Lift extension of bottom plate, rotate plate and remove from cleaner body. 4. Remove agitator and broken agitator belt. 5. Slip agitator through new belt. (With lettering toward
Question about Panasonic Vacuums
part numbers for washers and end caps of vacuum agitator brush I just bought a new agitator brush, and discover I need to purchase washers and end caps for agitator brush on Panasonic MC-V5746 vacuum ...
Question about Vacuums
agitator stopped rotating, has checked for clogs, cleaned agitator, and pushed reset button, but still not rotating. Any ideas? I have a Kenmore upright vacuum cleaner model 116.36933. The agitator ...
28 questions posted
Usually answered in minutes!
746 Questions
388 Questions
262 Questions
179 Questions