Tannoy Reveal 6D Speaker "audio cable" Questions

...you dont have HD tv than you would run cable wire from cable box to tv then run red and white audio from cable box to surround system, to listen to it you would select aux channel. Hope this

...You can use a single digital audio cable or the legacy RCA audio cables. The Audio Out ports are marked in white on the back of the TV. If it doesn't work, turn off the TV Speakers in the TV's

cable/sat/dvd) shuld have its own audio. Page 11. If your TV does not have any audio output jacks, you can connect the CineMateâ?¢ speaker system to the audio output jacks of another source,

audio cable that plugs into your IPod and then has 1/4 inch plug (or adapter) on the other. Radio shack can help you with the cable, just take your ipod in with you to make sure. The main thing on the

...cable) - Right (red) and left (white) audio paths. The S-Video connection provides a better signal that gives you a noticeably sharper picture. This setup is selected from the TV's input source

...audio cable. Does it says something meaningful like "digital" audio? That would go to any available coaxial digital input and it would have to be assigned within the VSX. Read the manual. You might ...

...audio cable shield or unwisely-routed audio cables will allow entrance of unwanted signals from external power sources, magnetic fields, even dimmer-controlled track lights. I've also seen ...

...audio oupputs from the cable box into the wharfdale. thats really the most common way to run audio, either that or through hdmi- either way, you will need to hqave a cable box to complete the set-up, ...

...tv . There is no sound Actually, you need the TV-related audio to connect to the HCD. Run a digital cable (if applicable) from you cable/sat box audio output to the HCDHX285; RCA cables if no

audio out cable is not red and white what do i need Get the best audio for whatever the TV is viewing from the same source (cable/dvd/blu-ray/sat). They will all have at least analog RCA audio output.