Question about One For All Televison & Video
...RF-IR command center. Things worked smooth for about 6 months. Now the RF part seems to be broken. I cannot control the receiver from downstairs. However, if I go upstairs and POINT the remote at the ...
Question about Logitech Televison & Video
...IR/RF Setup button 5. Use the Up or Down arrows to change from RF to IR 6. Press Select to save Note: Some models of DirecTV may have different steps to enable IR. You may need to refer to your user ...
...IR remote I need to have a RF can I reprogram this or can any RF universal work? No. You can't control the device by an RF remote control; wihcih is meant to work with IR remote ...
IR to RF and back to IR with an "IR repeater" work? The remote could be using RF, which is why your Niles equipment cannot handle it. There is no way to duplicate the RF or convert it to an IR signal.
...2. From the Menu press Select on Settings 3. Select Remote from the left menu 4. Press Select on the IR/RF Setup button 5. Use the Up or Down arrows to change from RF to IR 6. Press Select to ...
...IR remote. Since the controllers run off RF, the learn function will not work, unless you already have 360 remote control to use to do the learn function. Hope that offers some insight. This ...
...IR and RF don't transmit. I've dowloaded the llatest firmware and software. It accepts commands from other remotes but won't send. I tested the IR with my digital camera which shows it not working. I ...
...access card compartment 6. press SELECT Now the receiver will accept both IR and RF, but the directv device on the RC32RF remote will only emit RF signals. The av1, av2, and tv are all still IR
...RF. The Harmony remote can only send and capture IR (infrared) commands. Make sure you have your DirecTV device set to receive IR, and if you have an IR remote, or can set your remote to IR, then it ...
46 questions posted
Usually answered in minutes!
887 Questions
50 Questions
42 Questions
