Reddy R70ET Utility Heater "pilot" Questions

Sometimes I have a hard time keeping the pilot lit. When I can get the pilot lit, as soon as I turn the stove on from pilot, it goes completely out. When I can get it going, it will work fine for a ...

I have a VC Wonderfire model 2610. The pilot flame is perfect blue on both sides... however, when I hit the switch for the main burner to come on...the pilot goes out... any ideas ??? I cleaned the ...

Pilot turns on but when I switch to turn it on, Pilot turns on but when I switch to turn it on pilot flame goes off. Any suggestion? When you light the pilot, are you holding it down for 30-60 seconds

...Vent-free Gas Heater CGN18B I have a Comfort Glow Vent-free Gas Heater model number CGN18B. The pilot light will come on when i set the dial to "pilot". However when i turn it "high" the pilot ...

pilot light wont stay on. How do you adjust pilot flame? Pilot flame doesn't reach temperature sensor. then the pilot is blocked needs cleaning out or try blowing it out with air , or undone pilot and

pilot light won't light the low flame or stay on If the pilot light will light at all but not have a good strong flame I would remove pilot assembly and clean it thourghly,being careful not to damage ...

propane to control box but pilot won't light. No propane going to pilot. Model#rmc50lpt. Remove pilot tubing from gas valve and push the pilot knob to verify gas makes it out of the valve. If not, bad

I HAVE A VERMONT CASTINGS RADIANCE HEATER MY PILOT LIGHT WONT STAY LIT I HEAR THE THERMOCOUPLER TRIP THE VALVE BUT THE FLAME WILL GO OUT We had this problem and struggled with it for over a year. We ...

i have a empire corcho r-115 pilot is real little and shuts off after 5 min. and see flame under pilot You have a leak on the pilot tube under the pilot  hence the small pilot .leak needs to be ...

The pilot on my Procom QL300TYLA will not light. It appears that no propane is getting to the pilot. I tried lighting the pilot and burner with a BBQ lighter but nothing. No propane getting to the ...