Question about Brother Sewing Machines
...error message "The safety device has been activated". The upper thread was tangled. I have fixed it... but now not able to move the needle position up. It still display the same error message Return ...
Error message on Brother SE-270D sewing machine I have a Brother SE-270D sewing machine and I keep getting the error message "THE SAFETY DEVICE HAS BEEN ACTICATED" The machine does not beep at me, ...
needle or a bird's nest in the bobbin area. Sometimes when I try to put an extra heavy piece through the machine I' ll get that message. The most common reason for the error is a broken or bent needle
Question about Brother Sewing Machines
...error message: "The safety device has been activated" and the hand wheel on the right will not rotate. I've tried everything I can without removing the cover and would like to look inside to see if ...
error message "The safety Device have been activated" pops up on the screen Sounds like the shuttle needs to be cleaned. Turn off the power and open the needle plate. Remove the bobbin and bobbin case
error message. No tangled threads found. Balance wheel will move 1/4 turn either way. Both belts ok. Any ideas as to why it won't sew anymore? go to brother-usa.com website and try calling support for
error message "E4". I have done everything according to trouble shooting for the manual and online support from the singer website. Can anyone tell me what I am doing wrong because nothing I try seems
Question about Brother Sewing Machines
error message, take your machine to the nearest Authorized Brother Service Center for repair. You can locate a Brother Authorized Service Center (ASC) in your area by clicking on the link below. http:
...error message Balance wheel does not turn properly, when the needle goes to the down position, the machine stops, the Safety Device Activates, but no error message appears It sounds like there may be ...
Question about Sewing Machines
Error message "the safety device has been activated. Is the thread tangled? Is the needle bent?" Occurred after needle no 5 broke and fell out. The machine appears jammed. I have cleaned the bobbin ...
422 questions posted
Usually answered in minutes!
764 Questions
294 Questions
223 Questions
181 Questions
150 Questions