Brother SE-270D Computerized Sewing Machine > Search
shuttle Problem - Brother SE-270D Computerized Sewing Machine
needel crashes in to the shuttle need timing adjustment but how...
Clean machine.
Disassemble machine and clean shuttle....
same problem. I can got through the majority of the design and then the to thread winds around bobbin. I have cleaned out the shuttle many times, get started again and it winds around the bobbin again. I am frustrated to the point of tossing the machine. I did ...
You may also have dust under the shuttle it will cause the lower bobbin to not let out the right amount of thread and cause loops and thread jams where the needle ...
if your daughters sewing machine works fine then put your shuttle driver in the same place as hers in your machine. If that dosn't work then i can't help...
3010 Bobbin thread will not come up with thread (TOP) Changed needle and checked top treading plus new thread upper and bobbin thread. Oiled shuttle and hope I re-inserted it correctly but still no luck. My machine is a Brother XL3010 and is approx. 10 years old. yes I ...
Sewing Machine Elna 6000 model Cannot get top thread to catch and uplift bobbin thread, have changed bottom bobbin; think this may be shuttle problem. Need to get machine in to Polokwane in Limpopo Province to a repair center, cannot find a contact number of Elna there. Can ...
Back to Brother SE-270D Computerized... page.
Sponsored Links
Powered by
Repair Service
Find Sewing Machine Repairman Near You:
= Poor
= Average
= Good
= Excellent
