Hotpoint Ultima WD72 Front Load Washer/Dryer "need turn mains cleaning" Questions

Ad

...turn-on sometime it starts /all lights light up and stay on. Do I need to change the interface board or can I clean the board up with electronic spray clearner to clean contacts Could be loose ...

Ad

need to reset the fault turn off the mains hold in either the program select or on off or start stop or a combination of them and power on at the mains same thing like a sky or cable box to re-init it

Ad

Question about Fisher and Paykel Washing Machines

2 Answers

...need to identify where the water is coming from three main places are 1: pump seal 2: a hole in the drain hose 3: Main bowl seal my advice is turn it off at the wall lean it over and have a look ...

Question about Bosch Washing Machines

1 Answer

...Need manual too. It keeps beeping at me ''Pump blocked?'' and I have to drain it into a bucket. Do the following. Switch off the machine, unplug or disconnect the mains power to the machine and turn ...

...turn this feature on. I need step by step instructions- if that doens't work... I'll call the repair man! I have had this problem since I bought my washer. Some days the tub clean cycle will ...

...flashing F. We have cleaned filters. turned water off & power. sounds like water level sensor may need replaced. Call a Miele service

Question about Washing Machines

1 Answer

...turn the main on again reset/cancel the cycle sometimes with some models you need to hold in cancel and power on so set the machine to rinse and run it thru and a short spin once this is done clean ...

Question about Hotpoint Washing Machines

1 Answer

...need to unplug the machine from the mains and turn off the water supply. Then remove the lower cover, looking at it from the front where the glass door is, so you can see the water pump. On the water ...

Question about Hotpoint Washing Machines

1 Answer

...but the machine makes only a grumbling sound. Any ideas? hi you have surely an error code LE you need to replace the tachometer on the stator check for a bad wiring between the main board and the ...

Question about Hotpoint Washing Machines

1 Answer

...need to unplug the machine from the mains and turn off the water supply. Then remove the lower cover, looking at it from the front where the glass door is, so you can see the water pump. On the water ...

Not finding what you are looking for?
Hotpoint Ultima WD72 Front Load Washer/Dryer Logo

196 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...