Question about Washing Machines
...the drum belt rides on has loosened. You need to open up machine, find drum belt pulley, pull pulley taught, and tighten screws on pulley. Usually very easy to access that pully once covers are ...
Question about Hotpoint Washing Machines
...the belt around the motor pulley first , feed one side of the belt to drum pulley , whilst holding this side to drum pulley turn pulley using other hand , belt should follow natural path onto pulley
...turn the drum doesn't turn during wash or spin cycles Take back panel off and see if the belt broke or possibly came off the pulleys. Should go from motor pulley up and around big pulley on drum
...drum pulley one side or other whichever feels easiest as you start it on pulley start turning drum pulley whilst holding the belt to stop it slipping,keep turning until it goes on then line up to ...
drum pulley. It's a grooved belt, and if I move the belt in it falls off, and there is no more room to move it out. Don't see any way to adjust motor pulley or shaft. It runs in this position, but the
...drum/pulley Drum was not spinning. Found belt was shredded against drum and beyond saving. Replaced belt and put it on pulley. When spun the belt is now rubbing against drum and will not stay in ...
...drum pulley by hand to determine if there's a restriction that caused the locked rotor error. If there's a restriction, remove the drive belt. Pull the belt from one side of the drum pulley then turn ...
...DRUM PULLEY ,get new belt and lower so it goes over rear of drum pulley (big wheel)make sure nothing is in drum,put one bolt of motor in loosely and roll belt over motor pulley wheel slowly forcing ...
60 questions posted
Usually answered in minutes!
886 Questions
666 Questions
541 Questions
485 Questions
500 Questions