Question about Office Equipment & Supplies
...doesn't move at all but everything else works fine, how do i fix the hammer? The Hammer armature on the solenoid is cracked. This is a tough fix. for experienced repaimen only. I have ...
Question about Nakajima Office Equipment & Supplies
Won't print. I changed the ribbon thinking that Won't print. I changed the ribbon thinking that was the problem but it wasn't. The print solenoid armature may be cracked, you need a tech. DickyO
the typwriter does not transport the letters to the paper The armature for the print hammer is broken, (cracked). Only solution is to have it replaced.
Question about Swintec Office Equipment & Supplies
My typewrite has brand new ink cartridge. no print when you type characters. Sounds like the hammer armature maybe cracked
... Could it be that cartridge needs replacing. Perhaps ink driedup not usedfor year. The print hammer armature is probably cracked. This has to be done by a pro. The Print wheel may be in incorrectly. ...
Question about Smith Corona Office Equipment & Supplies
...I am not techy. Help... The hammer solenoid has either failed or the bumper on the bottom of the armature (on the solenoid to the lower right of the print mechanism has cracked and needs replaced. ...
Sears SR2000 typewriter solenoid The hammer on my typewriter won't strike. I don't know how to remove the print mechanism to replace the solenoid. I assume that is what the problem is.
Question about Smith Corona Office Equipment & Supplies
...it went off by itself and starts to smell bad but there was no smoke. What was burned in it? The armature in the
Hi MY haming pawl is not moving. The armature (used to be green) that makes the hammer hit the keys is cracked. The only solution is to replace it.Would have to be a typewriter shop?
12 questions posted
Usually answered in minutes!
205 Questions
14 Questions
5 Questions
14 Questions