...source for my UT 20763 carb primer nipple. Help. thanks Hi, thats a very common lawn trimmer. Most lawn mower shops should have that primer bulb in stock. Cost is around 4 to 5 bucks. Hope this ...
Question about Husqvarna Garden
...stroke, runs fine, but leaks gas, from carb whil husqvarna 324L 4 stroke, runs fine, but leaks gas form carb while running gasket is worn out. You can buy a generic gasket set from your local lawn ...
starter rope is loose on lawn edger Starter rope will not engage to start the engine when pulled. remove the recoil housing and wrap the chord round the spool more to take up the slack
Question about Craftsman Garden
to be sure. The lead says mini-tiller but your question says lawn mower. The 6.5hp motors, as far as I've dealt with were 4 stroke which means no mixture, but check with a dealer or shop, they'll know
...lawn edger, and the pulley just spins. Seems to have no compression. check for loose plug if 2 stroke the rings may be stuck/broken the sump seals at either end of the crankshaft are faulty if 4 ...
...ST-185, the clutch is optional. If you can remove the handle from the front engine cover (probably 4 Torx screws) and look inside, there would be a round 4" or so metal drum with the clutch inside ...
...4 cycle engines do not run on mixed fuel. Run on straight fuel. They have a spot to put oil in just like a lawn mover, and should be changed regularly. @ stroke engines run on mixed fuel. The ...
runs, will not idle. sounds like the wrong fuel oil mixture especially if smoking next time go with a 4 cycle the last a lot longer
What type of oil goes in my 4 cycle 26cc mini craftsman tiller regular 30whd just like your lawn mower Good Day.
i would like to no the factory setting on the carbarator i have a homlight z serious can you help [email protected] Factory settings on both the High and Low jets were 1 1/4 turns out.
13 questions posted
Usually answered in minutes!
337 Questions
73 Questions
29 Questions