HP DesignJet 500ps InkJet Printer "500 errors ink" Questions

...500 says I am out of ink, when in fact 3 of 4 are full, why does this happen and is there a way around this issue hi, for this issue to resolve power off the printer , remove all cartridges check the ...

...500 Plus error occur at the initial stage Back up EEPROM failed which was located in ISS( Ink supply station) & need to replace.. But this is major issue, only professionals can do this activity, ...

...500 is saying ink cardridges are empty but thay are new Here is a link where you can download a copy of the owner's manual for your printer: http://h10032.www1.hp.com/ctg/Manual/c00748239.pdf ...

HP 42" plotter printing dubble image after belt replaced. I have since replace all 4 ink heads and all 4 ink cartridges. Every time I print a test page or any doc I get a shadowed imaged (dubble image

...500 ps, error 79 : 04, error with blue ink... A 79 error most often indicates that you have a problem with the firmware for the printer. Go here and download the firmware update that corresponds to ...

...500, which I recently replaced the belt on, and was working, says System error 21:10 and contact hp support? System Error 21:10 refers to the Service Station, the Aerosol fan is probably dirty. Clean ...

...ink build up. You are best switching machine off so you can move the carriage out and clean to the right of it (in the maintenance area of the printer).If this has not helped, it is probably the line ...

...ink pocketed in teh service station. My mistake has been not to wear a glove and my hands are horrible. my ploter hp 500 do not accept sheet What a life saver! Been without my plotter for a couple of ...

...500 after removing the formatter card but i cannot due to communication problem through the copy the file to LPT1 through dos session from windows 7. what can i do to do that Thanks and best regards ...

...Ink Supply Station (refer to pg. 8-48 of the HP Designjet 500 and 800 Series Service Manual). Following replacement, attempt to verify functionality. If the error reappears, replace the Electronics ...