...turn on, press the Power button.Open the cover and reinsert the print cartridges.Close the cover. If prompted, print a calibration page.Print a Self Test to verify product is functional.Reconnect the ...
...on. Press and hold OK and HELP buttons while plugging in the power cord. Wait for the screen to go black or blank before releasing the keys. Just turn on the printer and configure your printer
...light. I have gone through the usual routine to clear a paper jam and there is not one. I've also turned it on and off however I am unabe to clear the error and as therefore cannot print. Do you ...
Question about HP DeskJet Office Equipment & Supplies
...key on your keyboard), All Programs, HP, HP Print Diagnostic Utility. 7. Double click on the HP Print Diagnostic Utility icon on the desktop of your computer. 8. Select the Appropriate printer from ...
Question about HP DeskJet Office Equipment & Supplies
...turn it on. Then connect the cable to the computer and watch for a Your devices are ready message. If you have already connected the printer to the computer, but did not have Windows Update on ...
...cover is closed. my e-mail address : [email protected] I had the same problem, and the cause turned out to be the cover switch not being fully pushed in. On the underside right edge of the top ...
Question about HP DeskJet Office Equipment & Supplies
...turn it on. Figure 1: Connect the USB cable to the HP product and the computer 1 - Connect the USB cable to the back of the product 2 - Connect the USB cable to the computer A Your devices are ready ...
...key. The Printers window opens. Right-click the icon for your product, and then click Printing Preferences . The product Toolbox opens. Click the Services tab and then click Service this Device . ...
Question about HP DeskJet Office Equipment & Supplies
...documents in the correct order and handling any printer problems that occur. When the printer is turned off, any documents you print will be saved (queued) for printing when the printer starts ...
...Copier 800 AL Try these steps to cancel the error, press the buttons continously STEP1. Press CLEAR key then EXPOSURE key then CLEAR key then EXPOSURE key STEP2. Then you are inside the simulation if ...
130 questions posted
Usually answered in minutes!
2,162 Questions
707 Questions
530 Questions
316 Questions
318 Questions
