Zanussi 24 in. DA6141 Built-in Dishwasher "spray arm wont rotate" Questions

...spray arm wont rotate, water is spyaying out and nothing in place to stop it rotating, can you help? Sounds like the pump that pushes the water up to the spray arm is going south on you. Check to see ...

...spray arm seal, but the arm still wont spin. I get water but not enough pressure to turn the top arm. The bottom arm works fine. Should the top arm turn easily when pushed by hand. It appears that it ...

spray arm can be rotated by hand. Then check the spray holes in the arm to make sure they are not plugged. (Sometimes calcium or food particles can plug them). If plugged use a straightened paper clip

...spray arm turning to 'wash' the soap out of the drawer - and that will be the problem.The spray arm isn't turning. Check the spray arm for blocked jets at the very end - use a pin to clear them out, ...

wont go. if u could please tell me how is it suppose to be used,maybe it will be ok.(i put the roller to second position and press power button, but what's with the E button, 70,and the other button?

...to see if there is anything blocking them.. also check the venturi assembly (the tower is in the center of the lower spray arm} As it is what supplies the upper spay arm. let me know if this

...spray-arm not spinning, incorrect stacking or overloading. If the upper spray-arm isn't spinning, there may be caused by a blockage in the spray-arm or the water delivery system, but, as the ...

...in reasonable condition. Mine has plenty of breaks in the base and the handles poke through, which affects the lower spray arm rotation. Please reply through another post if you're selling.

spray arm rotation slow Okay, first off the rinse fluid seams to drip out of the door of the dishwasher. It appears at the bottom lip directly under the door. Large quantities of it come out in a day

...spray arm seems to be rotating? Any help? Possibly needs a good servive. Remove spray arms and make sure every hole is totally clean. As well, take sieve out and pressure wash it as those holes are ...