my heating elerment is notworking is70c The element itself is bad, or it's A bad:-Thermal cut-off-FuseOR-Thermostat
Indesit is70c dryer is not heating? i have an Indesit is70c dryer, it was working fine up to last night we put a load into it, cleaned the filters and emptied the water tray as it is the condenser ...
indesit conden dryer is70c heater not workin had prob before cant remem ow to fix can help please,,,,,,,,,,,,,,,thanks dave Dave - This is usually the thermostats in the back - check these first
indesit dryer IS70CS Hi, my dryer is working apart from the heat! Its spins round ect,but no hot air! Could you please help? Thanks sounds like the heating element or thermostat has gone in the dryer ...
...indesit condenser dryer is70c this sounds like the thermostats Common faults - 1 Theheating elementscan fail (meaning open circuit) 2 There arecut-outs (T.O.C's)that might need resetting 3 ...
...Indesit IS70C tumble dryer is staying on even though the water container is empty. Consequently, the dryer is not heating. I have thoroughly cleaned the filter and condenser. Any suggestions? ANNE ...
Indesit is70c is not drying effectively. I have replaced the heating element assembly at the back of the machine as the old one was knackered when I took the rear plate off. The new one is heating up ...
...indesit is70c tumble dryer on and after a minute it trips the rcd. I then reset the rcd and turn it back on and it runs for about a minute and then trips the rcd again. Can anyone help me with this ...
...Indesit IS70C is only blowing cold air. It was fine this morning. Do we have to remove the silver back to get to the thermostat? Remove the lower rear panel, there you will see the heater element and ...
indesit website. fluff and old stuff gathers in it, if you leave it too long it will burn out the thermostat instructions below. Step 1 Open the condenser cover - grip the handle and pull towards you.
55 questions posted
Usually answered in minutes!
137 Questions
100 Questions
50 Questions
28 Questions
21 Questions