Zanussi ZBQ365 Electric Single Oven "door lock engaged open" Questions

...with the door open. So the door can not be shut. How can I "unengage" the lock so the door will shut. I canceled the self-clean cycle, but lock is still engaged with door open. try unplugging

door lock engaged with door open mom hit self cleaning button when wiping down stove with door open and lock is in engaged position with door open,has no cancel button push the clear/off button for ...

...door lock Oven door lock engaged while NOT in cleaning mode with door open. Will not disengage. Cycled main power, cancel button does not work; Oven also inoperable. HELP! Appreciate any tips or ...

...engaged, you can reverse the procedure to re-install the hinges into the door and re-install the door. Good luck!! The hinges are commercially avaialble from Applianceparts.com ...

...door lock moves into locked position then beeping starts and the word door flashes and the lock opens up. For some reason the oven thinks you have a door that is not shut all of the way. Check the ...

...door lock engagement rod is sticking out then with the door open hold the switch down with your finger then hit start then cancel lock rod should go back letting door close if engagement hook is not ...

...door, just prior to lock engaging. Now the lock won't disengage (door is open). Shutting off/restoring power (after one minute) does not solve. Lock light is flashing. SOUNDS LIKE MEMORIE PROBLEM ...

...door lock Self-clean was started while door was open. Now lock is engaged but door is open and the self-clean won't cycle through. There is no way that I can see to cancel the self-clean. I'm getting ...

...to fit new inner glass panel how do I get the door off open door fully. there is a hinge lock - usually a little arm on the hinge which comes up. engage hinge lock, partially close door and lift ...

...door lock is engaged and door won't close. How do I get door look to release so I can close the door? Hello, I would first try resetting the breaker or unplugging the unit for a minute or two and see ...