locked carriage HELP!! I am unable to scan using my Epson cx7300. A message appears suggesting that the carriage is locked. How can I unlock the carriage? hiii... you carriage is jam at the purge unit
...carriage moved to the far right "rest" position. I removed the cover by pushing in the 3 spring clips at the back. Below the cartridge holder there is a unit for collecting ink when the unit self ...
...unit and check that the carriage lid is fully closed, check along the carriage path for any loose objects. Turn the printer on with the scanner part open and see if it moves across at all or if there ...
Question about Epson Stylus Office Equipment & Supplies
...carriage motor ohms out of spec (not likely), a latch holding the paper eject mechanism not locked down, or one of the sensors for head or paper position not functioning properly. Confident with this ...
...carriage motor ohms out of spec (not likely), a latch holding the paper eject mechanism not locked down, or one of the sensors for head or paper position not functioning properly. Confident with this ...
...carriage in transport) and move it to locked position, then to unlocked, and power up your unit. Chances are that the carriage was not dislocated when trying to move while locked, and will start to ...
Question about Dell Office Equipment & Supplies
...carriage from moving. It's usually a crumpled piece of paper left over from clearing a jam, or a faulty purge unit/capping assembly. You should check to see if the printhead is locked or movable when ...
...carriage unit that has been moving or to move the carriage unit at a pause by force. Solution: Do not touch the carriage unit other than the carriage at the cartridge replacement position. Cause: ...
...carriage lower the cleaning unit but dont lock( 2 lever w/ spring) it, then put the Selinium Drum then insert the shaft. Next the developing unit right side and screw it. Engage now the cleaning unit ...
carriage makes an attempt to move back to its starting point. if everything seems to be moving ok then the problem could ly with the "home position" sensor. It could also possibly be a bad drive motor
276 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
454 Questions
438 Questions