...power/battery LED light flashes and in a certain position thisLED light stays firm, then the power socket is either faulty or it has a drysolder joint where it is connected to the motherboard. This ...
...power adapter). Remove the computer cover. Locate the battery on the board (see figure below). With a medium flat-bladed screwdriver, gently pry the battery free from its connector. Note the ...
power cord plugged into the computer and snap the battery back into its slot. Allow the computer to sit for at least 30 minutes, then unplug the power cord and press the "Power" button again to see if
Question about Compaq Computers & Internet
...power supply and battery backup with 550VA. What is wrong with my monitor? I plug it in to other outlets and the same thing, will not turn on or off??? Power Supply Defective, please send to repair ...
Question about Videoseven Computers & Internet
LED is blinking now. Start to page by pressing [POWER] and check for any action such as POWER OFF or VCR start to play. 4) If your device has action then check other keys such as [CH +/-] or [VOL +/-]
...power it lights up on the led but nothing on the screen. When it first happend benq logo would come up and go very quickly. Since then i took it apart and looked at the internal parts and i couldnt ...
...battery and only using AC power. If the power LED on the power brick does not come on then replace the power supply. If it works with just AC then replace the battery. If it still doesn't work, ...
Question about ViewSonic Computers & Internet
...power switch on the back side ? confirm it is on the ON position. If using a remote control, make sure the battery is properly installed.If the LED is on, but there is no video, use the following ...
Question about Packard Bell Computers & Internet
...power light is On, no screen, and after a while fans also stops. it remains like that. Will it start in safe-mode (F8)? check battery and mains adaptor.if you know anyone wt similar machine borrow ...
Question about Compaq Computers & Internet
...battery and only using AC power. If the power LED on the power brick does not come on then replace the power supply. If it works with just AC then replace the battery. If it still doesn't work, ...
2 questions posted
Usually answered in minutes!
3,409 Questions
2,234 Questions
1,799 Questions
796 Questions
724 Questions