...half duplex, still no connect. could it be cables not configured properly colorwise? I thought the switch works with either crossover or straight. Any ideas? thx First, NO, crossover cables are for ...
...Half Duplex Mismatch" and "Excessive late collisions". The "receive" switch shows "Excessive CRC/alignment errors" The fiber has been throughly cleaned and tested. The media convertors as well as the ...
Question about HP ProCurve Computers & Internet
Half/Full Duplex mismatch. Bad cable, too long a cable Bad network card in device The occational error is not a problem. Constant errors on the same port indicate a problem with the cable or device on
...half duplex to full duplex By default switch ports are in auto negotiation mode that means it will auto negotiates with the other end device for the speed and duplex settings. If you want to hardcode ...
...half duplex, when i do that my computer recognizes my ethernet cable but whenever i switch my speed/duplex to 100mbps half duplex or full duplex it says network cable unplugged (i have updated all my ...
...half duplex support for each port MDI uplink port for easy expansion Expansion is easy through a MDI uplink port. You cascade several switches together through this port to get more ports. ...
Half Duplex to to 10 Full and Half Duplex as well as Auto Negotiation - both PCs are running Win XP Be sure that when you say its a hub that is indeed a layer 1 device which is just passing the signal
Question about Computers & Internet
half duplex mode. On a switch such as S5700-28P-LI-AC, S5700-28P-PWR-LI-AC, if the rate of an interface is the same as that of member interfaces in an Eth-Trunk, this interface can be added to the Eth
Question about Computers & Internet
that the server connects to on the switch to 100Mb Full duplex, sometimes one side negotiates incorrectly, and the switch can set itself to half duplex, even though the other end is set to full duplex
...duplex full/half/auto port 1/2/3/4 options with the cpe command are backpreasure duplex (port by port basis or universal) protected (port by port basis) shutdown (port by port basis or universal) ...
10 questions posted
Usually answered in minutes!
9 Questions
4 Questions
5 Questions