Sony Cyber-Shot DSC-P52 Digital Camera "power button not turn" Questions

...POWER BUTTON DOES NOT FUNCTION BUT CAMERA TURNS ON WHEN YOU PUSH THE MENUE BUTTON!! The camera got wet and now the power button does not funtcion. Interesting thing is that it will turn on sometimes ...

power button for 30 seconds. Allow the camera to remain without power for 60 seconds. Reinsert the battery pack. Turn on the camera. To reset the Camera back to factory default, press the RESET button

...If this does not work do this: THE MASTER RESET (1) remove the battery pack (2) press and hold the power button for 30 sec (3) after put the battery back do not turn it on for 1 min (4) turn ...

...Power button to turn it off. Turn on the camera and check whether the camera is reset or not. This is a lastset upgrade and full firmware for S860 camera. (UP/FULL ver. 803141) - Improvement - 1. How ...

...power button, the blue light around the power button turn on, then beeps, and turns off. I tried with the power adapter plugged in and it does the same thing. The lens is zoomed out all the way and ...

...power button on top. I know the batteries are good because I can turn on the camera with the review button and review the pictures that I have taken. When the power button is pressed the green light ...

Power button will not work - it did not pop up when depressed. I removed battery and card and re-inserted but button is still stuck. Any suggestions? Found out that if battery needs charging, camera ...

...power-off to conserve battery life. To turn it back on just hit the ON/OFF button again. And then turn it OFF with the same button and the lens should retract as normal. The time out only powers down ...

...POWER button to turn power ON. Press Navigation button (left arrow button), Flash mode change each time button is pressed. you can use UP and Down Arrow button to change settings. Set it to FLASH ON. ...

...power button for 30 seconds. Allow the camera to remain without power for 60 seconds. Reinsert the battery pack. Turn on the camera. You can reset the Camera back to factory default by performing the ...