led just blinks and when i push the power butten nothing happens, and after maybe one hour the blinking stops or it could take days. and when i stops everything is okay again? this just happens when i
...Internal speaker. Pins 18, and 20 are usually not used. Pin 1 and 3 for the HarDDrive activity LED. Pins 5 and 7 for the Reset switch. Pin 9 is usually reserved for the factory, and is a 5 Volt test ...
...led is blinking and key board nums lock is working. I am expect your soluation. Thank you, frank either the internal video on the motherboard has failed or the video card has failed. look at the back ...
...LED (light) Next 2-pins are usually Reset switch. May not apply to a motherboard old enough to use a Socket 7 processor socket. There may be 18 to 20-pins. Bear in mind that many are not used, and ...
Question about Intel Computers & Internet
Monitor shut off, no BIOS post, no keyboard or mouse lights, will not boot I was working on my computer when the monitor suddenly shutoff. I did a manual reset and now the monitor will not turn on and
LED light is dim reverse the wires around. B) Pins 13, 15, 17, and 19 are used for an internal speaker. The internal speaker is used for BIOS Beep Codes. C) Pins 2 and 4 are for the HarDDrive activity
...internal speaker. This speaker is used for BIOS Beep Codes. C) Pins 1 and 3 are for the HarDDrive activity LED light. The red LED that blinks when the harddrive is actively in use. (Pin 1 is for the ...
...television as they are the best you can buy for a reason they used to use the best capacitors and
Question about ASUS - MOTHERBOARDS Computers & Internet
...led blink from the dram and a single beep letting me know its booting up .So i decided to do some cable management so i can put the panels back on my case.At the last minute I realized I forgot to ...
5,393 questions posted
Usually answered in minutes!
1,171 Questions
1,019 Questions
802 Questions
712 Questions
443 Questions