Ricoh Aficio 1013 All-In-One Laser Printer "replace drum" Questions

...high voltage supply unit 1. Check or replace the harness. 2. Replace the drum unit or paper transfer unit. 3. Replace the high voltage supply unit. replace drum black and swing to drum

...replace the hole drum unit. But as you say you have a problem with the drum cleaning blade, or in worse case the drum and the cleaning blade for the drum need to be replaced. So Katun offers a ...

Replace OPC drum Of the five possibilities above, replacing the drum is the most likely cause. Since you only had your drum for a couple of weeks I would take it back to where you purchased it and ask

...issue but that is not helping. Any ideas? Pull out the drums(right door) and see if there is any lines on the drums(replace the drum unit).Also check the transfer belt(below the drum) for any

...replace drum & charge roller. one side or both side of the drum the coating is deformed from where the charge roller voltage is leaking and SC302 is coming. tie a tape on the charge roller at the ...

printerwilln not print clearly kindly check your drum life.if your drum life expire then replace the drum unit.your problem will solved

How do you clean the print rollers? All my copies have a long vertical smudge/streak that runs entire length of the right side of the sheet (8.5x11 and 11x17). It might not be the rollers but the ...

...One of the 2 drum units should have the lines and that will tell you which one will need to be replaced. Hopefully it will be the black drum unit as they are relatively cheap. The color ones are

error code sc440 Ricoh cl2000n,error code sc440 Black drum motor error. These machines are bad about the waste toner building up in the drum unit. You could try and take the auger out of the drum unit

...is not removing without a cloth, then you need to replace the opc drum and the cleaning blade or both blades, some machines of this type have only one cleaning blade but some have two cleaning