...message. When I arrived home, I stopped the engine, and re-started, all was OK. I had taken this issue into my dealer on a previous occasion, within the first year of owning the car, and they said ...
...problems I have a 2000 jeep grand cherokee limited with the quadra drive. I replaced the cv shafts and the hubs but my front tires are not doing anything and it should be 4 wheel drive.. any ideas? ...
...hub if the bearing freezes up. Hello vgnir. There are a few items that can cause noises in the front f your vehicle. If this noise is as you are driving the first most common item that comes to mind ...
...leave a message for me in comments and I will check back. KL The vacuum shift solenoids have power to one side of them at all times. The GEM applies ground to them, to activate them, after the shift ...
...hub assembly. The inside is all rusted and appears as though it may need to be removed with a die grinder. Thanks in advance. Leaving the nut loose so that when it pops parts don't fly use a fork pry ...
...hub area I haven't had any problems until yesterday when no more than 5 minutes after leaving home my car started to overheat and I received a message saying to stop engine and that my engine ...
55 questions posted
Usually answered in minutes!
