2001 BMW X5 3.0i "lock car fob" Questions

bmw immobiliser problems when we use key fob to lock or unclock car the car seems to stale when reversing and just taking off but when use key directly in door it dosnt do it try reprogamming

...lock wouldn't pop up when i tried using the key fob but the other doors did unlock. I went through passenger side and unlocked the driver side by pulling the handle. The pin popped up ...

...switched back to allow the lock to work. You can test this by using the key in the door to attempt to unlock it manually. ...

LOCK FUNCTION). Your owners handbook SHOULD indicate fuse locations to be in the REAR CARGO area (remove the side panels by gently pulling out on upholstered rear panels)... look inside for the fuses.

...lock module resetting process (2014 Model) Step 1 Enter car and close all doors. Step 2 Kept Fob key in hand Step 3 Repeat the below process 5 times 1 Turn on the Acc mode, Press the Fob key lock ...

...car). then hit the lock button on one of the fobs. turn the ignition to lock. turn the ignition back to run and press the lock button again from the same remote. repeat untill all the locks cycle. ...

...lock the door. I just replaced the batteries in both fobs. Either the battery is dead in the FOB or the FOB is defective or the receiver for the FOB signal is defective. Sheer (2 against 1) numbers ...

...car but cannot open or lock the doors. Did get fob wet. Now dried out. Worked for first few days when pressed button on door handles. Would not work pressing open/close buttons on fob. Then stopped ...

lock system to fob Close all the doors and insert the key into the ignition. Turn the key off then on repeatedly until the door locks cycle. End with the key turned on. Press the lock or unlock button

...fob today the car starts but the key fob is not locking or unlocking the doors anymore. You need to visit an auto electrician, an alarm installer or an auto locksmith. The key fob needs re-pairing to ...