1993 BMW 325 "plugs brake lines" Questions

...plugs and fuel in the jugs. Pull a plug...... if it is wet there is no spark, if it is dry, there will be no fuel. There can be a lot of reasons for either problem, so let's try to figure out which ...

...plugs same problem,i change the coil and the spurk plug wire same problem,i change the fuel injector same problem and i got good pressure on the gas,the car seems running find and acelerate find but ...

plugs at the master cylinder( remove lines plug outlets at master cylinder) check if brake pedal position and pressure is good(if there is no change problem is master cylinder or brake booster/ vacuum

...brake line flare nuts on the end of the lines? I see nothing that looks like a 'plug'. You buy the lines ready made or you have them made a garage, using a brake line flare tool set. eBay sells them ...

brake lines carefully before removing them to prevent any gunk or debris from getting into the brake line connections. Remove the brake fluid reservoir cap, cover it with some plastic wrap and replace

brake lines is suspected, bleed the air from the system. NOTICE: Do not let brake fluid remain on a painted surface. Wash it off immediately. a)FILL BRAKE RESERVOIR WITH BRAKE FLUID Fluid:SAE J1703 or

My sons 93 century wagon has a leaking brake line that goes to drivers side rear wheel. We need to know which line outlet on the master cylinder controls that break so he cans plug it. He is 400 miles

...brake lines with a union. brakes work fine and no more leaking...except now I don't have brake lights...help! BTW of all the bronco ii and rangers in the junkyard, most of the RABS valves had been ...

...brake lines. This is not hard work, but it does require a brake line tool for cutting and flaring the lines. You may be able to borrow the tool, or check to see how much a brake place would actually ...

brake lines from the master cylinder. Slowly depress the brake pedal and hold it. Block off the outlet plug with your finger, and release the brake pedal. Repeat 3 or 4 times. Bleed the brake starting