Kenwood VR-4090 Receiver "shuts high volume amp" Questions

...off on its own The amp shuts off on its own if volume is to high Try getting a little fan , When I use to DJ same thing happened to me put a internal fan in it ... High volume will make it too

...shuts off for safety of fire, because the cooling fan only operates in high volumes only, so I recommend replacing the cooling fan, because that's what's the cause, make so sure you order the right ...

...shuts off when high frequency/high volume sounds occur during a movie. I have retested it and found once it reaches -30 volume for this specific sound, it shuts down. The receiver power light blinks ...

...shuts off to stand-by mode. at lower volumes it will work ok though. The receiver may be too under powered for your speakers or the speaker ohm's may not be matched for your amp. The reason it is ...

shuts it off. I tried everything but now i need help. some amps are made more for low ohm loads (bass) and some are made for high impedence loads (mids/highs) and it seems you are asking too much from

...volume high? how to fix my kenwood amplifier when iwant to turn the volume high it always automatic shut down? You need to make sure you ohms are correct if there too low this will happen to protect ...

high at first, it only shut down in surround sound mode, now it shuts down in stereo mode as well ... thank you Easy! You either have a surround speaker wired backwards or there is a break in the wire

...shuts off intermittently while watching or listining. Check all speaker connections. unplug everything.. start with just L and R speakers. Do a mic calibration..also check all your source inputs to ...

...shuts off, and goes into standby. The unit is protecting itself from a high current situation on the output amps. Either you have a bad speaker or an Amp that is getting ready to give up the ghost. ...

...high and it shuts itself off what does this mean? this started after i hooked up a subwoofer There is likely a problem in the power amp section that only becomes apparent when the increased volume ...