Midland 75-785 Handheld CB Radio "joint" Questions

Ad

Question about Cobra Radio Communications

1 Answer

working fine fliped it over it quit transmiting talkback and recive work good Unplug it,Take the cover off,and check for cold solder joints,bad solder joints. Look it over real good,might get a ...

Ad

Question about Connex Radio Communications

1 Answer

...I can tap the bottum of the radio n it will work fine. hi sounds to me like you have a dry solder joint or joints along the board somewhere this happens mostly to old rigs as such I suggest you ...

Ad

Question about Connex Radio Communications

1 Answer

...the top of radio,it transmits hello this could be down to two things either you have a dry solder joint on the board or your board is cracked open top panel and check for dry joints or a crack in ...

Question about Midland Radio Communications

1 Answer

then remove the back cover of the faceplate and check the faceplate connector itself for bad solder joints. As a matter of fact, check the entire radio for bad solder joints before looking any further

...radio....turn off for a20mins or so and turn back on to normal operation SOUNDS LIKE A COLD SOLDER JOINT OR A BAD COMPONNET WHEN IT WARMS UP THATS WHEN IT STARTS ..TAKE OFF THE COVER SO THAT YOU CAN ...

Question about Midland Radio Communications

1 Answer

...I don't even know where to start troubleshooting. Any suggestions??? Thanks It may be a cold solder joint on one of the stand up boards. Check all your connections and solder any bad joints. Ed NC ...

Question about Midland Radio Communications

1 Answer

i am useing a em27 with power pack in my home and receiveing is all crackly but when use my other cb not connected to power pack everything is fine, please help There is probably a loose ground wire ...

Question about Cobra Radio Communications

1 Answer

...soldered in the circuit.Wiggle the volume knob,listen if volume change. Sounds like a cold solder joint.Re- solder the joints to volume,or could be a dirty control, if still no volume, turn off and ...

Question about Magnum Radio Communications

1 Answer

...take it , Thanks, Fred. Take the back off,turn it over with green side up and inspect the solder joints very closely with magnifying glass, re-solder joints,...sounds like a cold solder joint,

Question about Ranger Radio Communications

1 Answer

RADIO WORKS FOR FEW MIN THEN STOPS TURN OFF FOR 10 MIN WILL WORK AGAIN SOUNDS LIKE A COLD SOLDER JOINT OR A BAD COMPONNET WHEN IT WARMS UP THATS WHEN IT STARTS ..TAKE OFF THE COVER SO THAT YOU CAN SEE

Not finding what you are looking for?
Midland 75-785 Handheld CB Radio Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1672 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...