Sony CDX-MP70 CD Player "radio faceplate removal" Questions

...radio/faceplate connector is broken or missing spring There is a plastic component with two tabs/prongs that project through the front of the radio body. The faceplate of my Jensen MP5720 is supposed ...

radio station will be saved all the time, do it in specialist in cars, just tell it that Well, this has been an interesting ride. I received a new faceplate, but that actually made the problem worse -

in cd mode. whats going on. The contacts on the faceplate or radio are dirty. Remove the faceplate and thoroughly clean the copper contacts with wet Q-tips in alcohol. Also clean the ones on the radio

...faceplate My faceplate was stolen. I do not have the manual. How do I find out what model I had? Remove the radio from the dashboard and the model details will be printed on a label on the ...

radio such as providing power to illuminate the faceplate. Make sure no contacts have been broken, pushed in, or have corrosion. Once they all look good, replace the faceplate and see if it lights up.

...faceplate of a DUAL XDMA7650 CAR RADIO? Two small screws hold the faceplates on a lot of the Dual drop down units Open the drop down face and remove the screws. Apply side ways pressure and slightly ...

...have to send the faceplate into the manufacters repair dept or a factory authorized repair center will most likely need the entire radio/ unit to repair the faceplate problems Good Luck!!! Larry ...

...radio it self....sometimes you have to ground the unit itself....seen this more than once...... If you can turn the unit ON/OFF and change stations using your faceplate, then the faceplate is OK. The ...

...radio faceplate. Use a paperclip or any other narrow object to fin inside the RESET button under the faceplate Kenny T. u may try to disconnect your battery cable to reset it,, and see if that could ...

...faceplate or eject cd on a kenwood KDC-516S CD Player that came with a car i purchased. it did not come with the remote or instruction booklet. i dont think the security system on the unit has been ...