Sony FD Trinitron WEGA KV-27FS100 27" TV "troubleshooting 5 blinks" Questions

blinks 5 times my sony wega does not get a picture and blinks 5 times.after unplugging it i will get the sound back temporeily and then nothing and it blinks 5 times used to blink 7 but i unplugged it

...5 minutes then plugging it back in...still the same result... MY TV is a KP53HS10 Rear Projection TV. I downloaded the repair manual but it has no troubleshooting section in it. What do I do? The ...

...it. When you turn it on, the red led on the front blinks for 5 seconds and then turns off. Can you tell me where to start looking? Is this worth a try? this is probably short circuit in h.t ...

...5 yrs old sony wega: KV-HP212M83 When I PowerON sound keeps working normally till the green LED blinks and screen is activated. when the screen is activated with completely greenish (No picture) with ...

5 minutes then plugging it back in... still the same result... MY TV is a KP53HS10 Rear Projection TV. I downloaded the repair manual but it has no troubleshooting section in it. What do I do? Standby

5 times.... until I unplug it. Can some one give a diagnosis? Break down for parts and labor. Thank you. It is impossible to guess at the parts without actaully troubleshooting the set with the proper

...5 times over and over. This has happened before. While I was gone to inquire about repair, it came back on because it was on when I returned. Since then (approx 3 weeks ago) we have made sure not to ...

...5 more clicks and then nothing. Sounds like something is repeatedly trying to start up but can't get going. If I can get help troubleshooting this & I'd like to repair it myself. Thanks so much! Bob ...

...5 times again. I know that is an error troubleshooting code but don't know what it stands for. Any idea what the problem may be? I already swapped out the fuse which was bad, but obviously is not the ...

...5 times a few times in a row can this be fixed without a remote No. It can't be fixed with its remote control. These blinks are fault indications, inside its circuit, and are called 'blinking codes'. ...