Sony KP-43HT20 43" Rear Projection HDTV-Ready Television "3d signal" Questions

3d setting is greyed out You may not have a 3d enabled signal. without a 3d signal you cannot turn on the 3d setting

...3D picture might when not wearing glasses. it sounds like your convergence is off. you have Red, Greed & Blue projection guns through your menu's you will find adjustments for them ... set your green ...

Only HD channels have 3D look - Sony KP-57HW40 My TV had the 3D look that everyone describes, so I bought a repair kit from tvrepairkits.com and replaced both convergence IC chips and 1 bad pico fuse.

...signal. Why would the screen turn 3d and become out of alignemnt ONLY when the HDMI is putting through the blue ray signal, also the red is not toally togethrr on some of the boxes. thanks You have a ...

...3d, colors are out of wack, screeen is bowed, and auto convergence is not in the menu. most likly fl231 fuse is blown. my question is has anyone fixed the problem by just replaceing the fuse or is it ...

...3D glasses. can u help me with this please. tHIS is a convergence problem.. first question if you go into the customer setup menu. is the convergence option listed? If you have not got that option i ...

...signal and it is my TV they said. The tv picture is blurry on the sides of the screen Like the people have a shadow or the writing is 3d. They went to the screen to align the blulbs (lines on the ...

...3D comb filter I2C error. you will need a new signal board for your set, or possibly have yours remanufactured which may be considerably cheaper than a new board. If you need more info please repond ...

...3d with colors skewed it is a convergence problem(fixable) but not related to anything like the signal provided it.If something (anything) like this let me know model number and I will try to

signal during auto-converge - is there a way to manually converge - or replace anything?? projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid