Sony Grand WEGA KDF-42WE655 42" Rear Projection HDTV "remove back panel" Questions

Ad

Question about Samsung Televison & Video

1 Answer

remove the back bottom panel Remove the top back panel (carefully the mirror is on it) Clean the mirror and the lenses (on the mirror don't use products with ammoniac) "a good tip is to use same staff

Ad

Question about Samsung Televison & Video

1 Answer

...4 screws there and don't remove the front cabinet with the screen, remove the back one with the mirror. I sugest you to use the old deflection yoke, in case your new crt is comming with his

Ad

Question about Televison & Video

1 Answer

...Remove any paper or obstacle you find jammed there. Close the back access panel. Make sure that it latches back into place. Find the front or top access panel. This is the panel you would lift to ...

Question about Panasonic Televison & Video

1 Answer

...OF THE BACK OF THE TV. CLEAN OUT PANEL WITH WATER AND DRY.(IF NOT DRYED OUT PROPERLY CAN CAUSE SHORT) CLEAN OF THE FAN ON THE BACK RIGHT SIDE (REMOVE ALL DUST) THEN REINSTALL BACK PANEL. TV SHOULD ...

Question about Philips Televison & Video

1 Answer

remove the back bottom skirt from television in order to get to the screws for the front bottom panel. When the front bottom panel is removed there will be more screws visible, for front screen. After

Question about Hitachi Televison & Video

1 Answer

many times. Usually the best thing to do is remove the upper back cover and remove the webs with a clean, dry cloth, but be careful because the mirror is attached to the inside of the upper back cover

Question about Philips Televison & Video

1 Answer

...remove lower back panel should be 2 screws on each side and a few across the middle. Pull panel back and you should see a black box with metal folding handle. Remove the two left screws and pull

Question about Sony Televison & Video

1 Answer

remove all of the screws from the back panel. Put the screws aside. Pull off the back panel. 3 Loosen the two screws from each side of the projection bulb's case. Pull the projection bulb out. Put the

...remove the dust buildup on them with a soft slightly damp cloth not pressing hard then dry it off with a cloth that is not damp . Make sure when putting the screen back on it slides back in the hooks ...

Question about Sony Televison & Video

2 Answers

remove all of the screws from the back panel. Put the screws aside. Pull off the back panel. 3 Loosen the two screws from each side of the projection bulb's case. Pull the projection bulb out. Put the

Not finding what you are looking for?
Sony Grand WEGA KDF-42WE655 42" Rear Projection HDTV Logo

1,050 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...