Philips Magnavox 20MS233S 20" TV "output voltage main board" Questions

Ad

Question about Televison & Video

1 Answer

...output voltage for value deteriation.  Replace it,  In most cases, this capacitor can be located at the video output circuit board [Picture tube base board].  The value of it may vary ...

Ad

Question about LG Televison & Video

1 Answer

output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience.

Ad

Question about Sony Televison & Video

1 Answer

...voltage drop...The problem could be on power supply board..If the power supply output is normal..The problem could be on the main board...If the problem is power supply you should check if the ...

Question about Proscan Televison & Video

1 Answer

...voltage that goes to the video output stage, that is the high voltage comes to the crt base, from the main board. It should be more than 260VDC. Normally in all tvs this voltage is derived from the ...

Question about Sony Televison & Video

3 Answers

...output supply voltage, something 50 or 60VDC lesser than that voltage. First check the video output supply voltage. It will come around 270 or so. If there is no difference between the video supply ...

Question about Televison & Video

1 Answer

...output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Pull up older posts. ...

Question about Televison & Video

1 Answer

output transistor. Check the input voltage to LOT. If the voltage is absent check the feeder resistor; if any. If you wish to get some details; check the site linked here. Surf the site with patience.

Question about Sony Televison & Video

1 Answer

output trnasistor, which drive the above said LOT, and the fault you describes will occur. Check the main secondary regulated supply voltage [140VDC] also. If this voltage is missing, check the reason

Question about Televison & Video

1 Answer

...output voltage has hight frequency Hello! I have a APCRS1500 and is losing voltage when the output voltage supplied to the network has high frequency Line-load-regulation to the TV power supply board ...

Question about Bush Televison & Video

1 Answer

output from it is more than normal, this kind of fault can occur. [Over-voltage / Under-voltage] problem. The main system control IC in the TV will detect this condition, and will shut the TV Off. The

Not finding what you are looking for?
Philips Magnavox 20MS233S 20" TV Logo

90 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...