Philips Magnavox 27MS343S 27" TV "deflection board" Questions

...warp the circuit board and see if the deflection restores. I have found bad solder joins in several sets which lost the Vert. deflection and was simply repaired by re soldering the

I need Deflection Board A1300319A I need Deflection Board A1300319A I have one for sale.

deflection board cost where could i find a deflection board why not look on eBay for a second hand TV close to you? Repairs could cost more then a new flat screen TV with the same screen size you want

...board and may be a jumper plug or other means of selecting service mode - not an actual switch.) When moved to the 'service' position, it kills vertical deflection and video to the CRT. If the switch ...

...board, deflection yoke connector solder terminals at the main board for loose solder terminals. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with ...

deflection yoke connection from the board first. be carefull becuse, it may be a little tight to detach, and keep your hands so away from the neck or the present picture tube. If it breaks accidently,

will a any deflection board for zenith fit in my zenith tv websites but i do not know if and deflection board will fit in my zenith HI The answer is no. Rich

...deflection board and the tube. You need to resolder the components in the deflection board and you've got to have the right soldering iron and some soldering experience. Good luck and be very careful ...

...deflection chip. The board will normally be labeled "vertical" or vertical deflection near these transistors. There will be two or more capacitors very near these transistors. Look at them on the ...

Deflection Board, (also called the "D" Board). If it is available, it is going to cost around $400.00. But it most likely fix the problem. Sony's Parts Department should be able to help with the Board