Philips 42PF9630A 42 in. Plasma Television "picture radio fuse panel located" Questions

...picture although it will power on The TV will turn on but the screen will not come on. I had the same problem some years back with another GV47L and believe that it was an onboard micro fuse that I ...

...Picture tube), interference from devices located nearby, and even a radio turned on and located really close to your unit. This is normally known as electromagnetic interference to electronics and is ...

...picture where are the fuses located Inside the set one or more on power board and elsewhere may be more.general info: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check main ...

picture no sound no led light is there a reset or a fuse Had EXACT same thing happen this week. Same TV as yours, 3 yrs old (purchased Feb 2008, Costco). TV wouldn't turn on, and usually does a "click

...picture issues: ISSUES: 1. IF sound main fuse/s are good. 2. If no power or standby check main fuse, standby power supply and any signs of damage you can see---burnt parts etc. 3. almost all these ...

...picture (there is sound), and the little light keeps flashing from red to green. I replaced about 10 electrolytic capacitors and a PWM controller IC (MC34067P). Fortunately, i found an almost ...

...Radio Shack didn't know wht I was talking about! Help!! I think best way is to take it to an authorized service station to troubleshooting and estimate the cost and parts need needed to repair audio ...

...Radio Shack #272-1032 1000mf 35v in place of the original 10v.... it will work for u!! thank u You may need a new power supply, I would check the power supply fuse where the ac plugs into the tv, you ...

radio shack or on the web. Thank you and votes are welcome and if you cant find the parts get to me and I can help you get them Facts: Vizio L32 LCD with no picture or sound /AMBER standby light is on

...picture tube), you will find R3340, which is a 10 ohm 1/3w resistor. The location of the resistor is printed on the bottom of the ckt board. It is burned open, replace with a 10 ohm 1/2w resistor. ...