Philips Magnavox 9P6034C 60" Rear Projection Television "dry back wet television" Questions

back on the slot that says "cable card slot" on top of the mother board. Now I can't turn on the tv. The fuse is fine, but wondering what I can do to fix this problem and get the tv to work? Thank sin

...back? try polishing the mirror thats located on the rear cover. you can reach it from the bottom rear its a stretch but can be done. Use a damp soft cloth with water do not use windex. The cloth cant ...

...back in though, and I made sure it was dry. Is this some sort of leakage from the IC's? What is this new problem all about? HI, I THINK ONE OR MORE TUBES ARE GONE.CHECK TUBES FOR CRACKES UNDER ...

...back of the TV needs to be cleaned. Remove the pop out door and clean the foam filter. Do not get it wet, just use the vaccum or blow the dirt out. There is a fan behind the filter, so any dust and ...

...back of the TV. Clean up lenses using dry paper towels, do not wet. In front of the TV after grill remove center cover and locate "black box" that have 6 potentiometers on it that looks like plastic ...

Dry While Blowing Air Onto Spill - Also I have Found Clear Mineral Oil Like Johnson Baby Oil To Work As Well If Not Better Then Glycol Oil. I Get For $2.50 For 20 Oz Bottle. Seems like you may need to

dry well (or use a handryer in high heat on the back of the TV). After 24 hours, replug everything and see. If it still does not work properly, these settings can be adjusted through the service mode.

back off and found the fuse blew.i replaced the fuse and it imeditly blew again i took the board out and seen it was wet under the board.i did my best to dry the plastic chassie and replaced the board

...back panel as to expose the tubes and clean then in the same manner you clean the screen. Make sure that before doing any of these procedures, make sure all the water that your daughter got into the ...

...gently pry the cover open. use a coffee filter and clean the contacts on the board and rubber pads. if it is wet inside you can wash the board windex then dry it well before you put it back ...