...channels 2 thru 13 on my tv. The rest of the channels 14 thru 51 wont come on. They are nothing but static. I have gotten them on before. When I auto program it only adds 2-13. Do I need to manually ...
...channels 2 thru 13. If you are using cable you will need to go into your on screen menu and find where to change the tuner from "air" to "cable" to get channels above 13. Older sets had a switch on ...
...channels. Make sure in the on screen menu that the tuner is set for CABLE or AIR depending on whether you have cable or an antenna. The channel frequencies are the same for ch 2 thru ch 13 but ...
channels 2 thru 7...has been happening for the past 6 months or so. Stations higher usually look and sound ok. Have 3 tv's in house and this is only one I have a problem with. Bad tuner.......they are
...channels. After the serching is done the tv stops at channel 7 instead of 2. Usually it will not have any problen starting at channel 2 and will go all the way thru cahannel 36, **** i can niot get ...
...expensive? Hi, I have a Zentih Model Number SY2572DT and I can not get any channels except 2 thru 13. I tried using the menu, but cannot find where to change to cable from antenna. Can someone
...channels are just missing now. The stations from 2-13 are intact, however the stations skip straight to channel 65. So, channel 65 is now channel 14, etc. It ends with what was channel 75, now, ...
...channels. Make sure in the on screen menu that the tuner is set for CABLE or AIR depending on whether you have cable or an antenna. The channel frequencies are the same for ch 2 thru ch 13 but ...
...channels, and get a picture on low band...2 thru 6, and then if not, how about any picture above channel 6, if you get picture on 2 thru 13 now, it could be whatever you have hooked in between the ...
145 questions posted
Usually answered in minutes!
339 Questions
335 Questions
292 Questions
276 Questions
218 Questions