...blows on power board Power board (Sony #APS-254, 147420221) keeps blowing 4amp ceramic slow blow fuse (T4AH, 250V). This is a pigtailed fuse, so it's a hassle to replace. Any ideas will be ...
Question about Toshiba Televison & Video
...tv and will not switch on. Replaced power board and worked for a while but when switched off at the wall, will not switch back on. First: Never turn the set off by disconnection of the power to ...
Question about Westinghouse Televison & Video
...component on the power board, which is short circuiting. There is a bridge rectifier S1wb, remove this from circuit and power the TV. If the fuse did not blow then this rectifier is faulty replace
power was restored, tv would not work. Cracked open tv and found two fuses with one blown. I replaced both and now when I plug it in, the one that was blown keeps blowing. Should I replace power board
...tv's to save on space but when there is a problem that blows the fuse it blows the chip at the same time. they cost less than you would think to replace these parts just few pounds or dollars but way ...
Question about Seiki Televison & Video
...the power board. In your case please check the fuse on the power board and replace it with the same rating. If the TV starts working, enjoy watching and if the fuse blows again, consult some TV
Question about Proscan Televison & Video
...tv model 26lb30h blows fuse on power board Took apart and replaced blown fuse and it blows it again If the fuse blows again after replacing it, there's a shorted diode, bridge rectifier, capacitor or ...
Question about Westinghouse Televison & Video
fuse blown on incoming power replaced fuse but no luck replaced the t8ah 250v fuse and it still blow when i turned on the tv Easy blow fuse or power board
...tv keeps blowing the fuse. I have tried three in as many days but pop! I am replacing it with 3amp. ANy ideas? the power board is what is my concern here. Things to check 1. Buldging Capacitors The ...
...tv power supply board itself could be anythings on the tv power supply board to causes the fuse to blow over and over again.U will never solved it if u don't have all the measuring elecronics ...
587 questions posted
Usually answered in minutes!
238 Questions
97 Questions
100 Questions
66 Questions
64 Questions