Samsung HLP6163W 61" Rear Projection HDTV-Ready Television "screen flashes goes blank" Questions

...flashes on the tv front of the screen bazel panel?This is tv has not been replaced the projection lamp like 1 1/2 or 2 years,tv been on,an in used like 4 or 5 hours a day.The projection lamp life is ...

...screen went blank and the 3 lights on the front of the tv were flashing (lamp/temp). I ordered, received, and replaced lamp as I had done previously with this problem. The tv worked beautifully for ...

...screen goes blank. the lamp was replaced about 1 1/2 years ago. could this be caused by the lamp going bad again? Hi,do you hear any strange noises? If you hear clicking or like wanting to turn on it ...

screen flashes on then goes blank Screen Lights up briefly and we can see a picture for less than a second then it goes blank. Repeats the process when turned off and back on. Normal Sound is present.

...screen goes blank, and the standby led is flashing.after about 3-4 minutes picture will come back for a short time and again goes blank. this keeps on repeating. It seems that your unit has some sort ...

...standby and the timer light flashes. Help! i have a projection tv. It is a a Samsung HDTV 55" widescreen. There is a green curvey lines at top of screen. Can you help? blank screen in toshiba ...

...flashes and the TV screen goes blank on and off for the first hour the TV is on The exact count of the flashes will indicate the nature of the fault. Count the flashes to the pause ( normally 2 to 9 ...

...screen flashes and goes off straight away. there is some voltage regulation problem in your tv ...... check out the video output module resistor, and also the fuse & resistor, capacitor on the power ...

...flashes 5 times again AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check ...

...screen goes blank during video or TV playback You need to replace the A board or your U board. It's hard to say. If your Flash Focus is functioning then your AD board is functioning. If you can see ...