Honeywell Electronic Programmable Heat/Cool Thermostat - CT3300A100 Heater "wait propane heater" Questions

Ad

Question about Reddy Heating & Cooling

1 Answer

propane within seconds. If you wait a minute it builds up then does the same thing like the propane tank is empty but it is full. Turn off the propane tank and disconnect the heater hose from the tank

Ad

Question about Reddy Heating & Cooling

1 Answer

propane heater I hooked it up to a fully filled 20 pound (5 Gal) propane tank and it ran fine for about 45 minutes then the burner shut off. I restarted the heater per the manual and it stayed lit for

Ad

Question about Reddy Heating & Cooling

1 Answer

...propane supply. Make sure there's enough gas in the tank to facilitate combustion. If the tank is full, turn of the tank valve and disconnect the hose from the tank. Wait 5 minutes and reconnect the ...

Propane Heater 85,000 btu runs for 40 seconds then shuts down wait 30 seconds flip switch starts again runs 40 seconds shuts down again WHATS WRONG THERMO COUPLER Need to replace pilot thermocouple ...

Question about Mr. Heater Heating & Cooling

1 Answer

...heater's hose is over 12' long and when hooked up for the first time takes several minutes of pressing the pilot button for the air to clear and the propane to come through so it lights. Perhaps you ...

Question about Reddy Heating & Cooling

1 Answer

My problem is different. When I turn it on in the low position it fires right up and continues to run as long as I'm holding in the button. Once I release the button, even after waiting the suggested ...

Question about Heating & Cooling

1 Answer

...your propane tank, but is the tank valve turned on and is the gas line shutoff valve at or near the heater turned on? If all of these are on, you'd better wait for you propane provider to service

...the propane but it will not ignite??? just trying to figure out why it will not light,I turn it off waited 10 seconds and tried it again serveral times,Im in Gadsden AL 35901 is ther a repair service ...

My heater cuts off after temperature is reached and pilot cuts off as well then I have to wait until the unit cools down to relight it overheat sensor is bad

Not finding what you are looking for?
Heating & Cooling Logo

802 questions posted

Ask a Question

Usually answered in minutes!

Top Honeywell Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Honeywell Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...