Honeywell Electronic Programmable Heat/Cool Thermostat - CT3300A100 Heater "wait" Questions

Mystery message "wait" appears above "following schedule" display line on our Th8000. Ac does not come on even when temperature is in range. Fan operates ok. Is "wait" setting one I can reset? Maybe a

...25 error 13! How can I fix and error code 13 on my 2 day old Rinnai Avenger 25 without having to wait 4 days for their service engineer? thermocouple high cut out on convection fan rinnai fitters ...

...not know how to solve this problem but i will add my own solution. Like you said, you will have to wait for it to begin functioning again after you plug it back up.while its unplugged, you have to ...

...propane tanks turned on gas,attempted to light wall unit push down control turn to pilot wait light pilot wait then try to turn to low, pilot goes out when you release control knob and ...

lights while holding primer/pilot button then runs out of propane within seconds. If you wait a minute it builds up then does the same thing like the propane tank is empty but it is full. Turn off the

...TO "ELECTRIC" CONTROL LEVEL FROM MANUAL CONTROL, YOU NEED TO TURN THE KNOB TO "OFF" LEVEL FIRST AND WAIT FOR ONE MINUTE, THEN TURN THE KNOB TO "ELECTRIC". IN CASE OF "ELECTRONIC" CONTROL LEVEL DOES ...

...procedure and Furnace will not Start (Electrically). --I receive only one click normally -- I waited longer and received several clicks although not like what happend earlier - Should I wait ...

Flame goes out after 5 to 10 min then have to wait until it cools to relight Unless, it's the wind blowing the flame out, I'd say the Thermocouple needs to be replaced. This is based on what you said,

...box controlling the unit, no breaker is tripped. Nevertheless, if I flip each breaker to OFF, wait 30 seconds, and then flip them back to ON, the unit will come on again and run fine. This ...

...ail function as they should, the unit has reset itself. If it doesn't work, then you'll have to wait until Monday to contact Dimplex OR you could contact the retailer you purchased it from and ...