Toshiba 57H81 57" Rear Projection Television "back cover remove tv" Questions

...back of tv(plillips) now carefully remove front cover.it unclips,sometimes you have to pry it off.take out screws from lamp cover,remove cover,take screws out of lamp, remove lamp.reverse process to ...

...I have a toshiba 57H82 TV. Dirt and dust has collected on interior of the screen cover. How do I remove the cover to clean inside? you have to remove the back of the tv to clean the inside

cover runs the entire lengh of the TV. You first have to loosen the thumb screws that are located at the back of the TV. One is toward the bottom left. Other is toward the bottom right. Once these are

...back to gether is revrse make sure to lock SAFTY COVER UNPLUG the other model is behind cover on frount of tv to get this off on each side of tv ( BACK CORNERS ) there is two big black srews that can ...

...back cover from the TV. Unscrew and remove all the wood screws holding the back cover on. Grasp the bottom portion of the back cover and pull straight back approximately 4 inches. You may require ...

...back of the unit.Step1 - Unplug the TV, then use a screwdriver to remove the screws of the Lamp Cover.Step2 - Remove the Lamp Cover.Step3 - Remove the Lamp Cover Duct holding the tab and pulling it ...

Back Cover, remove the 18 screws all around it. Use extreme caution here, as the mirror is fragile and when the last screw is removed, the back can fall down and damage the mirror. Use additional help

...back off the TV so it can be moved to a basement? Yes, start with unpluging the set. lol remove the lower rear cover first by removing all of the screws around the oustside edges, left-right-top-and ...

...back cover and see if any coolant has leaked on the circuit boards which may be the reason there's no response from your remote in certain applications... get back to me on this when you have some ...

...cover on the back. its a known issue with whaferdale tv's during manufacture, the lamp cover is not seated properly causing the safety switch to not engage all the way, when the lamp cover heats up ...