Goodman GMS90703BXA Heater "bottom furnace leaking" Questions

...bottom of my furnace. could something be plugged? What type of fuel does your furnace burn? Gas does condense more water when it fires, that oil-- and that condensing can be running out--- Usually ...

...bottom of Goodman propanefurnace drain tubes are clear. draining out under the actual furnace Check the top of the gas flue. Make sure the cap is on it. If not it will allow rain to get inside. If ...

...bottom of the new gas furnace. This happend last year and they said a hose was plugged. It is happening again this year and they are saying now it is because we didn't have maintenance performed. The ...

...bottom of my Furnace There is water leaking out the bottom of my Gas Goodman Forced Air Furnance. I have the overflow tubes all hooked up. This is the 6th year using this furnace and have never seen ...

furnace check to see if there is a flash code in the bottom blower section on the board. There will be an led light that will flash a designated number of times depending on the problem. Once you have

...Furnace. Condensation is leaking out of the bottom of the black plastic cover where the ventor motor is mounted. Are the cover bolts loose? It is just a slight trickle of water, but it collects and ...

...Bottom inspection window has a red blinking light and thermostat says furnace is running but isn,t until we shut the main power switch off then back on. Oil burner? If so sounds like there was or is ...

furnace, 3 flashes, combustion air switrch failed to close, how do I fix it. I have 2 of these furnaces in mobile homes I own.  On both of these the wheel inside the draft inducer blower that has

...furnace. You should be getting 25.85 volts which means the rollout is good on the top terminal. I would next test the bottom terminal of the rollout by touching the red meter probe to the bottom ...

...furnace 3 years old You did not mention if you replaced the tank filter or pump strainer. If you have a filter at the tank, change it. All oil pumps have a plastic strainer that should be replaced ...